This is highly experimental But of course, once the soil moisture is read out, it’s only a matter of time before automatic watering has to happen. Add one beefy (..ish) MOSFET and a small pump You get one basil with automatic watering. The setup now looks like this The watering algorithm Is very simple: I wait until the moisture level drops under a low threshold. Then I go into water mode: as long as the… Continue reading
This article is part of my 1000² Smart Home project. Check out the Architecture and Software and then move on to Hardware. An most importantly, check the Lessons learned and why I did what I did. There are already some first results, connecting all parts of the system. Progress Finally, enough pieces of the puzzle are starting to fit together in my Smart Home project, so that I can have some end to end functionality: press a button here… Continue reading
This article is part of my 1000² Smart Home project. Check out the Architecture and Software and then move on to Hardware. An most importantly, check the Lessons learned and why I did what I did. There are already some first results, connecting all parts of the system. What? This page covers things I have learned and why I did what I did in my 1000² project. Some experience, random calculations, opinions and thoughts. Battery philosophy So what… Continue reading