Intro It is quite clear that my smart home project is going quite slow and erratic. Following the other assembly, I made another batch of 5 sensor nodes. These are meant to use the new soil sensors, once they arrive. Since plants will be both outside and inside and we are talking about rain and water, the sensors will go into waterproof boxes, with the soil sensor connected via a cable. So, this assembly is due… Continue reading
This article is part of my 1000² Smart Home project. Check out the Architecture and Software and then move on to Hardware. An most importantly, check the Lessons learned and why I did what I did. There are already some first results, connecting all parts of the system. Starting with a top down approach – what the system should do, it soon became clear that some devices will be custom and some will be off the shelf. Determining… Continue reading
Trying Arduino, from the perspective of a bare metal embedded coder. Continue reading
This article is part of my 1000² Smart Home project. Check out the Architecture and Software and then move on to Hardware. An most importantly, check the Lessons learned and why I did what I did. There are already some first results, connecting all parts of the system. Intro There is plenty of software to use in home automation, but of course I decided to stay with open source and free options. In recent years there have been… Continue reading
This article is part of my 1000² Smart Home project. Check out the Architecture and Software and then move on to Hardware. An most importantly, check the Lessons learned and why I did what I did. There are already some first results, connecting all parts of the system. Some history A picture says 1000 words!* *inner voice dependent Which microcontroller? When I began this project, I was long given up on the ATMega and ATTtiny micro, with some… Continue reading
This article is part of my 1000² Smart Home project. Check out the Architecture and Software and then move on to Hardware. An most importantly, check the Lessons learned and why I did what I did. There are already some first results, connecting all parts of the system. What? This page covers things I have learned and why I did what I did in my 1000² project. Some experience, random calculations, opinions and thoughts. Battery philosophy So what… Continue reading
This article is part of my 1000² Smart Home project. Check out the Architecture and Software and then move on to Hardware. An most importantly, check the Lessons learned and why I did what I did. There are already some first results, connecting all parts of the system. Intro I have enjoyed building small home automation devices for many years, simple things that make life better or just cater for the lazy animal. The world has been dreaming… Continue reading
Enhancing an Atmel ICE programmer with serial port and target power. Continue reading
Third iteration of my led logger, a device that measures the lifetime of LEDs. Now with WiFI! Continue reading
Some quick stability tests for the ESP8266. Continue reading