10002 Control panel horror

Intro I have been making some slow progress with my smart home project. I have completed a small assembly run of motion sensors, there are plenty of things that are working and I shifted some focus on making a control panel. What I normally want is a control interface that works well from both a PC and a phone. Bonus if it can look nice on a tablet to have one real control panel on… Continue reading

10002 Short assembly run

Brief progress It is quite clear that my smart home project is going quite slow. It is not that I spent a lot a time on it, but that I have been pretty busy with other life things. But it is moving again now. Motion sensors assembly Once I settled on the type of motion sensor and case, I designed some sensor PCBs . I made a small assembly run of eight sensors just to… Continue reading

10002 Temperature sensors?

Intro There is no doubt, that integrated temperature and humidity sensors are the way to go at the moment for my smart home project. I had quite a bit of look at a wide range of sensors and settled for the SI7021. Silabs has a bigger family – most likely the same chip binned on precision – so here are cheaper options to use if I ever want to go for an application that can do with… Continue reading

10002 Progress

This article is part of my 1000² Smart Home project. Check out the Architecture and Software and then move on to Hardware. An most importantly, check the Lessons learned and why I did what I did. There are already some first results, connecting all parts of the system. Progress Finally, enough pieces of the puzzle are starting to fit together in my Smart Home project, so that I can have some end to end functionality: press a button here… Continue reading